You open the fridge for a glass of water, and that weird taste hits you again. The ice cubes look cloudy, and you wonder if the filter actually doing anything. That’s when you start looking for a replacement, and everydrop by Whirlpool Ice & Water Refrigerator Filter 1 comes up as the official OEM choice.
After digging through hundreds of verified buyer reports, manufacturer spec sheets, and NSF certification documentation, the verdict is clear. This filter is the most reliable option if you own a compatible Whirlpool, KitchenAid, or Maytag refrigerator. It’s not the cheapest, but it delivers certified contaminant reduction without the fitment headaches of generic brands.
Let’s walk through what makes it stand out and whether it’s right for your kitchen.
What it is
A refrigerator water filter sits between your home water line and your fridge’s internal dispenser and ice maker. Its job is to reduce sediment, chlorine, lead, and other contaminants before they hit your glass.
The everydrop by Whirlpool Ice & Water Refrigerator Filter 1 (model EDR1RXD1) is the factory OEM cartridge for many Whirlpool, KitchenAid, and Maytag bottom-freezer and side-by-side refrigerators. It’s the direct replacement for the original filter that shipped with your fridge. Competing brands like GE and Samsung use proprietary filters, while generic aftermarket options from companies like AquaFresh offer cheaper alternatives without the same certification guarantees.
This filter holds NSF certifications under standards 42, 53, and 401, meaning it has been independently tested for chlorine reduction, cyst removal, and pharmaceutical reduction.
How to Check If EDR1RXD1 Fits Your Refrigerator
Before ordering the EDR1RXD1, confirm that your refrigerator lists it as a compatible filter. This model is used in many Whirlpool, KitchenAid, Maytag, and Amana refrigerators, but compatibility can vary by model.
Check the filter currently installed in your fridge and compare its model number. You can also check your refrigerator’s manual or the filter housing for the recommended replacement. If your fridge specifically lists EDR1RXD1, you can use this OEM cartridge without an adapter. If you have a Samsung, LG, GE, or another brand, don’t assume it will fit. Verify the exact model before buying.
Setup & first impressions
Verified buyer feedback across hundreds of reviews calls the installation straightforward. You push the old filter in and turn it counterclockwise to release, then insert the new one and twist clockwise until it locks. The whole process takes about five minutes.
Several users mention running a gallon or two through the dispenser first to clear any carbon fines.
Out of the box, the filter feels solid. The plastic housing has a quality fit with no sharp edges. The O-rings are pre-lubricated.
A noticeable improvement in water taste is reported immediately by many buyers. One common observation is that the ice cubes come out clearer and without that stale fridge smell. There are occasional reports of difficulty removing the old filter if it has been in place for over a year, but that is a maintenance issue rather than a product flaw.
If you need to clean the area before installing, check out our guide on the best degreaser for kitchen cabinets.
| Filter model | EDR1RXD1 (everydrop by Whirlpool) |
| Compatible brands | Whirlpool, KitchenAid, Maytag, Amana |
| Filtration capacity | 300 gallons (approximately 6 months) |
| NSF certifications | NSF 42 (chlorine taste/odor), NSF 53 (lead, cysts), NSF 401 (pharmaceuticals) |
| Reduction claims | 97% chlorine, 99% lead, 99.95% cysts |
| Dimensions | Approx. 4.5 x 4.5 x 9 inches |
| Operating temperature | 33°F to 100°F (0.5°C to 38°C) |
| Installation type | Push-to-connect, quarter-turn twist |
Daily-use experience
Filtration quality
The everydrop filter’s performance is backed by testing under NSF/ANSI standards. According to the NSF certification database, it reduces chlorine by 97% and lead by 99%. Verified buyers consistently report a noticeable difference in taste.
Water and ice from the fridge dispenser lose that metallic or musty flavor. If you’re using filtered water for beverages, you might want to pair it with a good cold brew setup. We’ve rounded up the best coffee beans for cold brew.
The filter also handles cyst reduction (99.95%), which is important for those on well water. One trade-off: the flow rate drops slightly compared to a brand-new generic filter, but it remains steady across the six-month lifespan.
Ice production
Many users mention the ice cubes come out clearer after switching to this filter. That’s because the filter removes minerals and particles that cause cloudiness. The effect is subtle but consistent.
If your ice maker was making cloudy cubes before, expect a visible improvement. The filter does not affect ice production speed, only the quality. Some reviewers note that after three months, the ice starts to develop a slight taste if the filter is not changed on schedule.
That’s a reminder to set a calendar reminder.
Longevity and replacement indicator
The manufacturer rates the filter for 300 gallons or six months, whichever comes first. Most refrigerators have a filter indicator light that prompts replacement. If your model lacks that, track usage roughly: a family of four typically hits 300 gallons in about six months.
A common complaint is that the indicator light may not reset properly on some fridge models. In that case, holding the reset button for 3 seconds usually works. For a deeper clean of your fridge interior, consider using the best degreaser for air fryer on stubborn grime (the same citrus-based cleaners work well on fridge shelves).
Pros and cons
✓ Pros
- Certified under NSF 42, 53, and 401 for chlorine, lead, cysts, and pharmaceuticals – independent lab verification gives peace of mind.
- OEM fit guaranteed for Whirlpool-family fridges, so no adapter rings or struggling to seat the cartridge.
- Easy push-and-twist installation takes less than 5 minutes; no tools required, per aggregate user reviews.
- Consistent water flow rate throughout the 6-month lifespan, unlike some generics that clog early.
- Noticeably clearer ice cubes and better-tasting water within a few glasses, according to hundreds of buyer reports.
✗ Cons
- Premium price compared to generic replacements – you pay for the certification and brand trust.
- Only a 6-month/300-gallon lifespan; some third-party filters claim 12 months.
- Slight decrease in water pressure compared to an old, clogged generic? Actually, some users note a minor pressure drop versus an empty bypass plug, but it’s within spec.
- Not compatible with non-Whirlpool-family fridges (Samsung, LG, GE) – verify your model first.
Score breakdown
Who should buy it
Buy it if you…
Own a Whirlpool, KitchenAid, Maytag, or Amana refrigerator that lists the EDR1RXD1 as the recommended filter. You want the assurance of NSF-certified reduction for lead, chlorine, and cysts. You also prefer a filter that installs in minutes with no adapters or clunky parts.
If you regularly use your fridge’s water and ice for drinking and cooking, this is the set-it-and-forget-it solution.
Skip it if you…
Have a different brand fridge, this filter only fits Whirlpool-family models. Also, if you’re on a tight budget and willing to risk uncertified filters that may not reduce contaminants as claimed, a generic third-party cartridge could save you money. But you lose the peace of mind that comes with independent testing.
If you want a filter that lasts a full year, look for models with higher gallon capacity.
Better alternatives
If you still want OEM but need a longer lifespan, consider the everydrop EDR2RXD2 (the larger replacement for certain French door models). For a lower-cost option, brands like WaterChannel and AquaFresh sell compatible EDR1RXD1 replacements. They are much cheaper but lack NSF certification for lead and cysts.
Check their labels carefully. If you’re in a different fridge ecosystem, GE RPWFE and Samsung DA29-00020B are the equivalents for their respective brands.
Frequently Asked Questions (FAQ)
Does the everydrop filter work with KitchenAid refrigerators?
Yes. KitchenAid is owned by Whirlpool Corporation, and many KitchenAid models use the same EDR1RXD1 filter. Check your fridge’s manual or the filter housing to confirm.
The everydrop by Whirlpool Ice & Water Refrigerator Filter 1 fits most KitchenAid side-by-side and bottom-freezer models from the past decade.
How often should I replace the filter?
Everydrop recommends replacing every six months or after 300 gallons, whichever comes first. That’s about the standard for most OEM refrigerator filters. If you notice a drop in water flow or a change in taste, replace it sooner.
The fridge’s indicator light will also signal when it’s time.
Does this filter reduce fluoride?
No. The NSF 53 certification covers lead and cysts, but not fluoride. For fluoride reduction, you would need a reverse osmosis system or a specialized carbon block filter designed for that.
The everydrop filter is not advertised as removing fluoride, consistent with most inline fridge filters.
Will the filter affect water pressure?
Very slightly. The carbon block adds resistance, so you may notice a minor reduction in flow compared to running water without a filter. This is normal for all pressurized refrigerator filters.
If the drop is severe, the filter may be clogged or past its lifespan. Replace it and the flow should return to normal.
How do I install the filter?
Turn the old filter counterclockwise about a quarter turn until it releases. Pull it straight out. Insert the new filter into the housing, line up the arrow, and twist clockwise until it clicks into place.
Run 1, 2 gallons of water through the dispenser to flush carbon fines. That’s it. No tools needed.
Final verdict
The everydrop by Whirlpool Ice & Water Refrigerator Filter 1 earns a solid 4.5 out of 5 stars. It delivers certified contaminant reduction, a perfect OEM fit, and simple installation. The main downside is the price premium over generic alternatives, but you are paying for verified performance and peace of mind.
If you own a compatible fridge, this is the filter to trust.
Affiliate disclosure: This post contains affiliate links. If you buy through one of these links, I may earn a small commission at no extra cost to you. It never changes my recommendation, I only suggest gear I’d actually buy myself.
